ALBA AC70PLV4 MT8163 ALBA 7 TAB FIRMWARE AND FLASH FILE 100% TESTED SP TOOL ERROR SOLUTION

MT8163__archos__Alba_7__ac70plv4__5.1__ALPS.L1.MP8.V1_PSKYED8163.E

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : archos

ProdName  : MTKAC70PLV4_ALBA

ProdModel : Alba 7"

Device    : ac70plv4

AndroidVer: 5.1

MTKxCPU   : MT8163

MTKxPRJ   : ALPS.L1.MP8.V1_PSKYED8163.E

[Read Ok] : preloader_em_t8370_emmc.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : tz1.img

[Read Ok] : tz2.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT8163 / V1.1.2 / em_t8370_emmc / EMMC

Android Info saved

FW Size : 2433 MiB

Scatter saved to : D:\Firmware\All Tab Firmware\Alba\MT8163__archos__Alba_7__ac70plv4__5.1__ALPS.L1.MP8.V1_PSKYED8163.E\

All done!

Done!

Elapsed: 00:06:20

Reconnect Power/Cable!

Download Link...

Before Flash Take A Backup Your Personal Data After Doing Flashing Firmware Your All Personal Data Will Be Erased. and if you Are Technician We Always Advice to You Make A Backup Full Rom Then Proceed Any Operation.

How to install this rom (Video guide):

The following Problems will be solved by this Firmware.

#Suddenly auto restart. ( switching on or off)
#LCD blinking ( multiple colors)
#Black or white display light.
#Monkey virus or sexy virus or spam.
#Slow working of RAM.
#Showing storage full.
#System Apps error.
#unfortunately App has been stopped problem.
#frp lock remove
#hang logo or only logo view problem solve

REQUIRE FOR INSTALL:

• PC & Laptop
• Smile Q7 CA MT6572 Firmware
• MTK USB Driver
• Sp Flash Tool
• USB Cable
• And Your device battery should be charged up to 30%

Flashing Guide:

Requirement:

• A PC.
• USB Data Cable.
• Install the latest SP Flash Tool Software.
• Install VCOM Driver on the PC - Download Drivers Here
• The Phone you wish to Flash.
• File to be Flashed - Download Gionee - Tecno - Infinix - Firmware
• Difficulty Level – Medium.

Procedure:

1. Power off the Phone you wish to flash (if your Battery is Non-removable), remove the Battery and put it back (if your battery is removable) but don’t press the boot/on button. Also, ensure there’s a formatted SD card in the Phone (If it has SD Card Slot).

2. Launch SP Flash Tool as Administrator 

3. Navigate to the top right and click on Scatter-Loading

4. In the window that pop up navigates to the folder, you saved your phone scatter file and select it. (Scatter File is a text file with .txt extension and the word “Scatter ” in it name).

5. A list with ticked boxes should appear in SP Flash tool (PRELOADER, MBR, EBR1, UBOOT etc.)

6. Un-tick the Box in front of any item you do not wish to Flash (If you forget your Phone password you can easily wipe your data by ticking "USRDATA" at the bottom ).

7. To manually add an item that is not gets ticked automatically after loading the Scatter File, follow these steps. Tick the box in front of that item, double-click its location and select the corresponding file in the window that pops up.

8.  When you have ticked all the files you wish to flash, click download or press CTRL + D.

9.  At this point, all option would be delisted except stop Button.

10. Connect your phone via USB Cable (with its Battery Inside).

11. At the Bottom right, a progress bar would begin to run.

12. Do not interrupt the process.

13. Be patient on till you get a success Message (A green Cycle with OK)

14. Disconnect the Phone from the USB Cable, remove the Battery for 10 seconds (if removable), reinsert the battery and power up the Phone.

15. Finally, go to recovery mode and do a factory reset to clear any error.

      Congratulations !!