Huawei scl-u31 flash file dload flash by sd card or sigmakey without password
Huawei_Y6_SCL-U31_(SCL-U31C900B130)
New software version update is available for your device. Upgradation from SCL-1U31C900B130 to SCL-U31C185B140. This upgrade offers: 1. USSD fix 2. Other stability fix Data charges may apply when downloading via mobile network. Downloading over Wi-Fi is recommended.
Full Guide on How to Install Stock Firmware on Huawei Y6 SCL-U31:
Pre-Requisite :
This Guide is only for Huawei users.
- You need MicroSD Card or internal memory space to try any Huawei Stock ROM
- A Micro SD card of 8GB or more should be available. It is recommended that The Micro SD card is made by ADATA, Silicon Power, Hp, Sandisk, Kingstone, or Kingmax.
- Make sure you have enough battery to run the upgrade process. It is recommended that the power of the battery is more than 40%.
- Upgrade operations may erase all your user data. So if there is some important information, you should backup them before the upgrade.
- Before flashing, you should unzip the SDupdate_Package.tar.gzfile, and get out UPDATE.APP to do upgrade operation on your SD Card. To unzip, we may sometime share two zip file, Update.zip package always comes with the main update.app which is a complete OS. Where has data file comes with data files from Huawei? Check the below file list.
- First of all, Download the Update Package
- Recommended: Format the Micro SD card (This operation is optional).
- Now Unzip the Update.zip package and
- Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
- Now on your phone, Open the dialer and call ->enter: *#*#2846579#*#* ->ProjectMenu->Software Upgrade->SDCard Upgrade->OK,
- Now select the Update.app that you moved to SD Card (root directory).
- Now you will see a screen which shows the installation process.
- Wait until the installation process completes.
- When the progress bar stop, the phone will restart automatically
- In case if you have the Data File and you want to flash it, then, first of all, delete the earlier moved update.app from the dload folder
- then you can extract the second file (update_data_Xxxxx) from above and move the new update.app to the dload folder.
- repeat the same 4-8 Steps above.
- That's it! You have Installed Stock Firmware on Huawei Smartphone.
OR use sigma key for Full flash (Video instructions):
SigmaKey 2.40.07b1 Qcom: Write firmware
^ Android Bootloader Interface, Version 0.5, Name: MSM8909, Serial number: d84dcefc
(ADB) Writing flash...UPDATE.APP
Firmware: SCL-U31C900B130CUSTC185D001
Wrong selection of firmware files can damage the phone.
Are you sure you want to proceed? [YES]
Phone model: HUAWEI SCL-U31
Version: SCL-U31C900B150
Writing flash partition...Partition table doesn't exist
Writing flash rpm...OK
Writing flash tz...OK
Writing flash sbl1...OK
Writing flash modem...OK
Writing flash modemst1...OK
Writing flash modemst2...OK
Writing flash fsg...OK
Writing flash aboot...OK
Writing flash recovery...OK
Writing flash erecovery...OK
Writing flash system.0...OK
Writing flash system.1...OK
Writing flash system.2...OK
Writing flash system.3...OK
Writing flash system.4...OK
Writing flash system.5...OK
Writing flash system.6...OK
Writing flash userdata.0...OK
Writing flash cache.0...OK
Writing flash cust.0...OK
Writing flash persist.0...OK
Writing flash boot...OK
Writing flash...Done
Restarting phone...OK
WARNING
Before Flash Take A Backup Your Personal Data After Doing Flashing Firmware Your All Personal Data Will Be Erased. and if you Are Technician We Always Advice to You Make A Backup Full Rom Then Proceed Any Operation.
Problem will solved:
- LCD blinking (Black or white Fix).
- After Hand Reset Frp Or Gmail Lock.
- After Flash Hang On Logo.
- After Flash Dead Recovery.
- Tools Da Or Secure Boot Error.
- Monkey Virous, Sexy Virous, Spam, Automatically Data Or Wifi On Off.
- Slow Working of Cache & Ram.
- Showing Storage Full.
- System Apps Error.
- Unfortunately App Has Been Stopped.
No comments: