MANGO SQ7 FIRMWARE DEAD RECOVERY FLASH FILE WITHOUT PASSWORD

MT6580__Joyar__Mango_SQ7__8.1.0__Mango_SQ7_V05_15112018__O11019__Mango_SQ7

Android Info

 Build ID: O11019

 Display ID: Mango_SQ7_V05_15112018

 Version: 8.1.0

 Build Date: 2018年 11月 15日 星期四 17:08:19 CST

 Model: Mango_SQ7

 Brand: MANGO

 Device: Mango_SQ7

 Manufacturer: Joyar

Android Info END

Password: Allah is Almighty

Firmware download link  here

THE ADVANTAGE OF STOCK ROM:

• Flash Stock Rom To Unbrick your Smile Q7 CA MT6572
• Flash Stock ROM to Fix the boot loop Problem
• Upgrade and Downgrade Smile Q7 CA MT6572 Matching By Build Version
• Unroot or Fix Bugs on your phone
• To fix the lag or stutter on Smile Q7 CA MT6572 By flashing Stock ROM, you can solve software problems
• Revert back to stock to gain your warranty.

REQUIRE FOR INSTALL:

• PC & Laptop
• Smile Q7 CA MT6572 Firmware
• MTK USB Driver
• Sp Flash Tool
• USB Cable
• And Your device battery should be charged up to 30%

Flashing Guide:

Requirement:

• A PC.
• USB Data Cable.
• Install the latest SP Flash Tool Software.
• Install VCOM Driver on the PC - Download Drivers Here
• The Phone you wish to Flash.
• File to be Flashed - Download Gionee - Tecno - Infinix - Firmware
• Difficulty Level – Medium.

Procedure:

1. Power off the Phone you wish to flash (if your Battery is Non-removable), remove the Battery and put it back (if your battery is removable) but don’t press the boot/on button. Also, ensure there’s a formatted SD card in the Phone (If it has SD Card Slot).

2. Launch SP Flash Tool as Administrator 

3. Navigate to the top right and click on Scatter-Loading

4. In the window that pop up navigates to the folder, you saved your phone scatter file and select it. (Scatter File is a text file with .txt extension and the word “Scatter ” in it name).

5. A list with ticked boxes should appear in SP Flash tool (PRELOADER, MBR, EBR1, UBOOT etc.)

6. Un-tick the Box in front of any item you do not wish to Flash (If you forget your Phone password you can easily wipe your data by ticking "USRDATA" at the bottom ).

7. To manually add an item that is not gets ticked automatically after loading the Scatter File, follow these steps. Tick the box in front of that item, double-click its location and select the corresponding file in the window that pops up.

8.  When you have ticked all the files you wish to flash, click download or press CTRL + D.

9.  At this point, all option would be delisted except stop Button.

10. Connect your phone via USB Cable (with its Battery Inside).

11. At the Bottom right, a progress bar would begin to run.

12. Do not interrupt the process.

13. Be patient on till you get a success Message (A green Cycle with OK)

14. Disconnect the Phone from the USB Cable, remove the Battery for 10 seconds (if removable), reinsert the battery and power up the Phone.

15. Finally, go to recovery mode and do a factory reset to clear any error.

      Congratulations !!