Welcome to Octoplus everyone! On this website, we share latest and essential apps for your device. that you can remove pin lock, remove pattern lock, Fix IMEI problem, Fix to hang on the logo, etc. This software work so simply but effectively. By using this software, we can quickly do those task. This tool is free to download that can easily be used. We have provided the latest version of this Firmware on our web page; anyone can download it free from here.
Why need this firmware:
suddenly your phone is crash with virus or hanging problem or bootloop, hang logo, restart problem then you need to flash firmware to fix your device. hard reset not working and doesn’t enter recovery or any kind of software issue then you need to must install stock firmware for repair you smart phone. a Smart Phone’s not working good properly without a good firmware. so android firmware program is a part of life smart phone.
IMPORTANT NOTES:
back up your personal data and information. after flash your data will remove for userdata reset. this file is not responsible for your personal data. it is safe use and able to solved your phone problem. if not work for you i will back your money.
And Your device battery should be charged up to 30%
Flashing Guide:
Requirement:
A PC.
USB Data Cable.
Install the latest SP Flash Tool Software.
Install VCOM Driver on the PC - Download Drivers Here
The Phone you wish to Flash.
File to be Flashed - Download Gionee - Tecno - Infinix - Firmware
Difficulty Level – Medium.
Procedure:
1. Power off the Phone you wish to flash (if your Battery is Non-removable), remove the Battery and put it back (if your battery is removable) but don’t press the boot/on button. Also, ensure there’s a formatted SD card in the Phone (If it has SD Card Slot).
2. Launch SP Flash Tool as Administrator
3. Navigate to the top right and click on Scatter-Loading
4. In the window that pop up navigates to the folder, you saved your phone scatter file and select it. (Scatter File is a text file with .txt extension and the word “Scatter ” in it name).
5. A list with ticked boxes should appear in SP Flash tool (PRELOADER, MBR, EBR1, UBOOT etc.)
6. Un-tick the Box in front of any item you do not wish to Flash (If you forget your Phone password you can easily wipe your data by ticking "USRDATA" at the bottom ).
7. To manually add an item that is not gets ticked automatically after loading the Scatter File, follow these steps. Tick the box in front of that item, double-click its location and select the corresponding file in the window that pops up.
8. When you have ticked all the files you wish to flash, click download or press CTRL + D.
9. At this point, all option would be delisted except stop Button.
10. Connect your phone via USB Cable (with its Battery Inside).
11. At the Bottom right, a progress bar would begin to run.
12. Do not interrupt the process.
13. Be patient on till you get a success Message (A green Cycle with OK)
14. Disconnect the Phone from the USB Cable, remove the Battery for 10 seconds (if removable), reinsert the battery and power up the Phone.
15. Finally, go to recovery mode and do a factory reset to clear any error.
Congratulations !!
BLU STUDIO G2 FLASH FILE S010Q CUTOMER CARE FIRMWARE DEAD BOOT REPAIR DONE BY SP FLASH TOOL 100% TESTED
Reviewed by octuplus
on
June 17, 2021
Rating: 5
No comments: