SYMPHONY V102 CUSTOMER CARE FIRMWARE WITHOUT PASSWORD BY SP FLASH TOOL FREE
Welcome to Octoplus everyone! On this website, we share latest and essential apps for your device. that you can remove pin lock, remove pattern lock, Fix IMEI problem, Fix to hang on the logo, etc. This software work so simply but effectively. By using this software, we can quickly do those task. This tool is free to download that can easily be used. We have provided the latest version of this Firmware on our web page; anyone can download it free from here.
Why need this firmware:
Symphony V102 file without password:
Well, I’m getting to share this post Flash File Stock ROM and the way you’ll easily flash your smartphone. Friend, we’ve shared the guide in several steps, you’ll follow the entire guide. don’t skip any steps, as each step of the guide has some inherent importance. So let’s go friends.
Patch Level : O11019
Display ID : V102_HW1_V3
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-10-05
Build Time : 1572616916
Product Model : V102
Product Brand : Symphony
Product Name : V102
Product Device : V102
Board Platform : mt6580
Product Manfct : Symphony
Product Info : k80hd_bsp_fwv_512m
Product Board : k80hd_bsp_fwv_512m
Board Platform : mt6580
IMPORTANT NOTES:
Take a backup of your old ROM Flashing before Flashing. As the help tou Anything wrong happened After Flashing. You Cloud Recover your device Back. IF you Phone Emmc IC Or CPU Had been damaged then our file and we are Responsible Foe This….
WHAT KING OF CAUSE YOUR PHONE TO DEAD?
Issues or tumbles ordinarily found on Walton Primo Gh7 can be sorted into.
Three problem classifications, to be specific:
⦁ 1. Programming Problem matters.
⦁ 2. Hardware Problems matter.
⦁ 3. Problem matter his SW and HW
smartphone issues.
REQUIRE FOR INSTALL:
- PC & Laptop
- Smile Q7 CA MT6572 Firmware
- MTK USB Driver
- Sp Flash Tool
- USB Cable
- And Your device battery should be charged up to 30%
Flashing Guide:
Requirement:
- A PC.
- USB Data Cable.
- Install the latest SP Flash Tool Software.
- Install VCOM Driver on the PC - Download Drivers Here
- The Phone you wish to Flash.
- File to be Flashed - Download Gionee - Tecno - Infinix - Firmware
- Difficulty Level – Medium.
Procedure:
1. Power off the Phone you wish to flash (if your Battery is Non-removable), remove the Battery and put it back (if your battery is removable) but don’t press the boot/on button. Also, ensure there’s a formatted SD card in the Phone (If it has SD Card Slot).
2. Launch SP Flash Tool as Administrator
3. Navigate to the top right and click on Scatter-Loading
4. In the window that pop up navigates to the folder, you saved your phone scatter file and select it. (Scatter File is a text file with .txt extension and the word “Scatter ” in it name).
5. A list with ticked boxes should appear in SP Flash tool (PRELOADER, MBR, EBR1, UBOOT etc.)
6. Un-tick the Box in front of any item you do not wish to Flash (If you forget your Phone password you can easily wipe your data by ticking "USRDATA" at the bottom ).
7. To manually add an item that is not gets ticked automatically after loading the Scatter File, follow these steps. Tick the box in front of that item, double-click its location and select the corresponding file in the window that pops up.
8. When you have ticked all the files you wish to flash, click download or press CTRL + D.
9. At this point, all option would be delisted except stop Button.
10. Connect your phone via USB Cable (with its Battery Inside).
11. At the Bottom right, a progress bar would begin to run.
12. Do not interrupt the process.
13. Be patient on till you get a success Message (A green Cycle with OK)
14. Disconnect the Phone from the USB Cable, remove the Battery for 10 seconds (if removable), reinsert the battery and power up the Phone.
15. Finally, go to recovery mode and do a factory reset to clear any error.
Congratulations !!
No comments: