SAMSUNG A520F U12 FRP REMOVE SOLUTION WITH FILE FREE
Samsung a520f frp remove done with combination file. it's only for binary number 12. not supported for upper binary.
All file and tool download link here,- COMBINATION_FAC_FA60_A520FXXUCASL1
- A520FXXSCCSKD_A520FZTOCCSF1_ZTO
- Odin
- Samsung driver for mobile phone
- download all file from upper link
- install samsung driver in your pc
- extract all file
- open odin
- flash by combination file
- wait for on and open usb debugging
- again off and input to download mode
- flash by 4file just use home_csc file
- wait for full open
- enjoy your a520f
How To Install Galaxy A5 2017 SM-A520F U12 Stock Firmware:
Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.
How To Flash Samsung Stock Firmware With ODIN
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the files on your computer.
3: Now, Switch off your Smartphone.
4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.
5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.
8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.
9: Now, click on the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
The once Firmware process is completed you will be able to see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see, the Pass message in Odin, you can disconnect your Device from the computer.
The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.
When your Galaxy A5 2017 SM-A520F U12 finally boots up, you should now be running your desired firmware.
No comments: